Pacific Antenna
Affordable QRP Antennas and Kits at exceptional value


Dummy Load

The 10 Watt (DC-150MHz) 50 Ohm Dummy Load/Power Meter kit is available as either a through hole, or SMT (Surface Mount Technology) version.

In addition to the dummy load, each version has an on board Schottky diode that rectifies the RF voltage and provides a peak detected output.

With the use of an inexpensive 11 Megohm digital voltmeter, it will provide accurate power measurements from about 0.5 watts to 10.0 watts.

You chose which version best suits your needs. The through hole option can be assembled with common soldering tools and techniques, and the SMT alternative is good training kit for anyone wanting to gain some experience using simple SMT techniques with 1206 size components.

Both versions of the kit include all the necessary components, connectors and a circuit board.

Total assembly time ~1 hour.

Supporting Files and Documents

 Through Hole Dummy Load Assembly Manual
 Surface Mount Dummy Load Assembly Manual

Ordering Information

Ordering electronically by PayPal using the buttons below.

When an order is placed through PayPal, shipping charges are automatically calculated then a confirmation email is immediately sent by PayPal. We also receive this same email, so please rest assured that we have logged your order into our books. No other order confirmation will be issued. Your kit will be shipped in 1-2 weeks after our receiving the order, unless otherwise stated. Thanks for your support.

Dummy Load Through Hole: $15.00
Dummy Load Surface Mount: $15.00
View your PayPal cart: 

Page last updated: 01/10/2017, 13:32:05
Page Maintained by:
Copyright © 2001-2016 Pacific Antenna/QRP Kits, All rights Reserved.
Pacific Antenna Return Policy