Available May 12th, 2009
Switched Longwire Tuner Plus
The SLT+ is a Switched Longwire Tuner that is ideal for tuning a longwire.
With just one support and a length of wire and the SLT+ getting a signal
on the air has never been easier. The SLT+ has been completely redesigned
and updated by Steve Weber and Ken LoCasale. No more drilling of holes!!
The case is prepunched, finished brushed aluminum that comes complete with
decals as shown. And now you can tune 80 meters!! It is the perfect
tuner for hikers, backpackers, campers and to throw in the suitcase for
that overnight business trip. The SLT+ now features improved slide
switches which reduce the weight and are much smaller in size. One of the
problems with the old kit was that the builder had to measure and drill
the holes. Ken LoCasale, who designs all of our cases was not happy with
the old case and suggested a complete redesign. Steve Weber said that as
long as we are redoing the board, we might as well add 80 meters. The
result? The SLT+ which will be introduced at Dayton, and will be
available for ordering online on May 12th. Check out the manual below.
The kit comes with all parts, wire, commercial quality doublesided
silkscreened soldermasked board, and a prepunched brushed aluminum case.
|
Supporting Files and Documents
|
 Switched Longwire Tuner Plus Builders manual (rev 4/17/09)
Bottom Label
|
